CFD simulation of mixing process in a large crude oil storage tank with side-entry impellers
DOI:
https://doi.org/10.15332/iteckne.v12i1.818Palabras clave:
Side entry impeller, mixing, storage tank, computational fluid dynamicsResumen
This work presents the study of the flow distribution in a crude oil storage tank of 36.5 m of diameter. The tank is equipped with two side-entry impellersplaced at 90° and 45° mounting angle. Computational fluid dynamics (CFD) is used to simulate the tank conditions with 7.7 m of filling level. In addition, it is performed a homogenization time analysis of two different crude oils, for the case of mounting angle of 45°. A twophase model (Volume of fluid, VOF) is used to simulate the mixing process. The rotation of the impellers is modeling by Multiple Frames of Reference (MFR). The phenomenon is resolved using the RNG version of the k-ε turbulence model.
Descargas
Citas
A. A. Dakhel and M. Rahimi, “CFD simulation of homogenization in large-scale crude oil storage tank,” J. of Petrol science & eng, pp. 151-161, 20 Jan 2004.
M. Rahimi, “The effect of impeller layout on mixing time in a large-scale crude oil storage tank,” J. of Petrol Science & Eng, pp. 161-170, 2005.
B. Wu, «Computational fluid dynamics study of large-scale mixing systems with side-entering impellers,» Eng Appl of Computational Fluids Mech, vol. 6, nº 1, pp. 123-133, 2012.
J. A. Castro Gualdrón, L. A. Abreu Mora y F. A. Díaz Mateus, «CFD simulation of crude oil homogenization in pilot plant scale,» Ciencia, Tecn y Futuro, vol. 5, nº 2, pp. 19-30, Jun 2013.
E. L. Paul, V. A. Atiemo-Obeng and S. M. Kresta, Handbook of Industrial Mixing. Science and Practice, New Jersey: John Wiley & Sons, Inc. , 2003, pp. 259-263.
E. M. Marshall y A. Bakker, Computational Fluid Mixing, Lebanon, New Hampshire, USA: Fluent Inc., 2003.
J. N. Haque, K. J. Roberts y T. Mahmud, «Modeling turbulent flows with free-surface in unbaffled agitated vessels,» Ind. Eng. Chem. Res, pp. 2881-2891, 2006.
B. Wu, «CFD investigation of turbulence models for mechanical agitation of non-Newtonian fluids in anaerobic digester,» Water Research, pp. 2082-2094, 2011.
B. Launder y D. Spalding, «The numerical computation of turbulent flows,» Computer methods in applied mechs and eng., vol. 3, pp. 269-289, 1974.
A. W. Patwardhan y J. B. Joshi, «Relation between flow pattern and blending in stirred tanks,» Ind. Eng. Chem. Res., pp. 3131-3143, 1999.
J. A. Sossa, Experimental and computational study of mixing behavior in stirred tanks equipped with side entry impellers, Vancouver: University of British Columbia, 2012.
J. Aubin y C. Xuereb, «Design of multiple impeller stirred tanks for the mixing of highly viscous fluids using CFD,» Chem. Eng. Science, nº 61, pp. 2913-2920, 2006.
M. Tyagi, S. Roy, A. D. Harvey III y S. Acharya, «Simulation of laminar and turbulent impeller stirred tanks using immersed boundary method and large eddy simulation technique in multi-block curvilinear geometries,» Chem. Eng. Science, nº 62, pp. 1351-1363, 2007.
T. Kumaresan y B. J. Jyeshtharaj, «Effect of impeller design on the flow pattern and mixing in stirred tanks,» Chemival Eng J. , nº 1185, pp. 173-193, 2006.
M. Rahimi y A. Parvareh, «CFD study on mixing by coupled jet-impeller mixers in a large crude oil storage tank,» Computers and chem eng., nº 31, pp. 737-744, 2004 diciembre 2007.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
La revista ITECKNE se encuentra registrada bajo una licencia de Creative Commons Reconocimiento-NoComercial 4.0 Internacional Por lo tanto, esta obra se puede reproducir, distribuir y comunicar públicamente, siempre que se reconozca el nombre de los autores y a la Universidad Santo Tomás. Se permite citar, adaptar, transformar, autoarchivar, republicar y crear a partir del material, siempre que se reconozca adecuadamente la autoría, se proporcione un enlace a la obra original y se indique si se han realizado cambios.
La Revista ITECKNE no retiene los derechos sobre las obras publicadas y los contenidos son responsabilidad exclusiva de los autores, quienes conservan sus derechos morales, intelectuales, de privacidad y publicidad. Sin embargo esta facultada para editar, publicar, reproducir y distribuir tanto en medios impresos como digitales, además de incluir el artículo en índices internacionales y/o bases de datos, de igual manera, se faculta a la editorial para utilizar las imágenes, tablas y/o cualquier material gráfico presentado en el artículo para el diseño de carátulas o posters de la misma revista.



