Mechanical behavior and corrosion of steeltools nitrided and coated PAPVD
Abstract
In recent years, surface engineering has been employed for the optimization of coated systems, as well as other surface treatments, by means of plasma-assisted technologies. Hard coatings obtained both by PAPVD and PACVD can improve significantly the surface properties of the substrate in terms of its mechanical properties and corrosion resistance. Coatings are an integral part of the expansion of new surface engineering technologies. Therefore, the surface engineering field seeks the development of new techniques and materials in order to optimize such coated systems. The ultimate aim is to provide them with the required microstructural features to ensure suitable surface properties and to increase the life of industrial parts and components. This paper presents the main results of the characterization of the mechanical properties and corrosion resistance of a TiN and TiAlN coatings deposited onto D2 and H13 tool steels by PAPVD. The steel substrates were employed both in their original condition, as well as after nitriding.
Downloads
References
[2] L.N. López de Lacalle, A. Lamikiz, J. Fernández de Larrinoa and I. Azkona, “Advanced cutting tools” in Machining of Hard Materials, cap.2, Davim, J.P, pp.33-85, 2011.
[3] F. Czerwinski, “Heat treatment-conventional and novel applications,” in Publisher: InTech, Cap.5, Ed.Frank Czerwinski, pp.73-112, Sep. 2012.
[4] S. K. Khrais, Y.J. Lin, “Wear mechanisms and tool performance of TiAlN PVD coated inserts during machining of AISI 4140 steel,” Wear 262, pp.64–69, 2000.
[5] G.S. Fox-Rabinovich, B.D. Beake, J.L. Endrino, S.C. Veldhuis, R. Parkinson, L.S.Shuster, M.S.Migranov, “Effect of mechanical properties measured at room and Elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings,” in Surface and Coatings Technology 200, pp.5738–5742, 2000.
[6] S. PalDey, S.C. Deevi, “Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review”, in Materials Science and Engineering, vol. 342, issue 1-2, pp. 58 – 79, Feb. 2003.
[7] Li-Ho Chiu, Chang-Hui Wu, Heng Chang, “Wear behavior of nitrocarburized JIS SKD61 tool steel,” Wear 253, pp. 778–786, 2002.
[8] ASM Handbook, “Heat Treating,” vol.4, pp 608-619, 1998.
[9] ASM Handbook, “Surface Engineering,” Vol. 5, pp 2023- 2026, 1998.
[10] M. R. Cruz, M. H. Staia, J. Feugeaas, “Tribologías en Aceros con Tratamientos Superficiales Tipo Duplex, una revisión,” en Revista Facultad de Ingeniería UCV, vol. 20, no. 1, Mar. 2005.
[11] R. Rodríguez-Baracaldo, J. A. Benito. E. S. Puchi-Cabrera, M. H. Staia, “High temperature wear resistance of (TiAlN) PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments,” Wear262 (3), pp. 380-389, 2007.
[12] G. Bejarano, M. Gomez, M. Arroyave,“Deposition and characterization of duplex treated coating system applied on hot work steel AISI H13,” en Revista Latinoamericana de Metalurgia, vol. 32, no. 2, pp. 218-224, Dic. 2012,
[13] H. Çalışkan, C. Kurbanoğlu, P. Panjan and D. Kramar, “Investigation of the performance of carbide cutting tools with hard coatings in hard milling based on the response surface methodology,” in Int J Adv Manuf Technol, no. 66, pp.883–893, 2013.
[14] M. Hernandez, M.H. Staia, E.S. Puchi-Cabrera, “Evaluation of microstructure and mechanical properties of nitrided steels,” in Surface and Coatings Technology, vol. 202, no. 10, pp. 1935-1943, 2010.
[15] E. S. Puchi – Cabrera, “A new model for the computation of the composite hardness of coated systems,” in Surface and Coatings Technology, no, 160, pp.177–186, 2002.
